Author Topic: Fiorenzata Bricoletta  (Read 10253 times)

Offline mp

  • Standard User
  • *****
  • Posts: 16800
  • Nothing like a nice shot!
Re: Fiorenzata Bricoletta
« Reply #30 on: February 27, 2017, 01:32:14 PM »
Do you have a Vibration Pump or a Rotary Vane Pump? Or, should I say, are you switching one for another?

http://www.1st-line.com/store/pc/Vibration-Pump-vs-Rotary-Vane-Pump-d51.htm

 :)
1-Cnter, 2-Bean, 3-Skin, 4-Parchmnt, 5-Pect, 6-Pu
lp, 7-Ski

Offline Alaroast

  • Standard User
  • **
  • Posts: 134
Re: Fiorenzata Bricoletta
« Reply #31 on: February 27, 2017, 04:58:49 PM »
Do you have a Vibration Pump or a Rotary Vane Pump? Or, should I say, are you switching one for another?

http://www.1st-line.com/store/pc/Vibration-Pump-vs-Rotary-Vane-Pump-d51.htm

 :)

I have a Procon Series 1 rotary pump. I ordered a new one today. Hopefully this will be the fix. The pump was frozen up when I got the machine. I'm not switching pump types, staying with rotary.
Fiorenzato espresso, Ceado E6P v2 grinder, USRC 3kg roaster

Offline mp

  • Standard User
  • *****
  • Posts: 16800
  • Nothing like a nice shot!
Re: Fiorenzata Bricoletta
« Reply #32 on: February 27, 2017, 05:52:11 PM »
Do you have a Vibration Pump or a Rotary Vane Pump? Or, should I say, are you switching one for another?

http://www.1st-line.com/store/pc/Vibration-Pump-vs-Rotary-Vane-Pump-d51.htm

 :)

I have a Procon Series 1 rotary pump. I ordered a new one today. Hopefully this will be the fix. The pump was frozen up when I got the machine. I'm not switching pump types, staying with rotary.


Sounds good.

I can't wait to see your new machine in operation.

 :)
1-Cnter, 2-Bean, 3-Skin, 4-Parchmnt, 5-Pect, 6-Pu
lp, 7-Ski

Offline Alaroast

  • Standard User
  • **
  • Posts: 134
Re: Fiorenzata Bricoletta
« Reply #33 on: March 03, 2017, 08:14:15 AM »
This thread continues to grow, thanks everyone for bearing with me through this learning process. ;)
I installed a new pump. Tried adjusting pump to 9 bar (130 psi) using a portafilter mounted gauge. I can only get it up to about 7 bar (100 psi) before the motor starts stalling. I am still running from a jug at this point because I wanted to ensure machine was going to work out before working on plumbing. From what I've read, some machines have no problem with running from a jug while others do. Do you think that if this machine is plumbed in to water source (approx. 45-50 psi or 3 bar), this will bring brewhead pressure to about 9 bar?
Fiorenzato espresso, Ceado E6P v2 grinder, USRC 3kg roaster

Offline Alaroast

  • Standard User
  • **
  • Posts: 134
Re: Fiorenzata Bricoletta
« Reply #34 on: March 09, 2017, 06:40:22 AM »
The saga continues...new boiler, new pump, plumbed in with pressure regulator adjusted to 30 PSI, pump pressure adjusted to 9 bar and thought all was well. Now water is seeping from vacuum breaker while machine is off. I'm guessing fill valve/solenoid may be bad. I'll probably disassemble the valve to check for blockage and check condition. Any thoughts on what to look for at this point?
Fiorenzato espresso, Ceado E6P v2 grinder, USRC 3kg roaster

Offline mp

  • Standard User
  • *****
  • Posts: 16800
  • Nothing like a nice shot!
Re: Fiorenzata Bricoletta
« Reply #35 on: March 09, 2017, 10:24:54 AM »
The saga continues...new boiler, new pump, plumbed in with pressure regulator adjusted to 30 PSI, pump pressure adjusted to 9 bar and thought all was well. Now water is seeping from vacuum breaker while machine is off. I'm guessing fill valve/solenoid may be bad. I'll probably disassemble the valve to check for blockage and check condition. Any thoughts on what to look for at this point?

I like that you are approaching this methodically. Unfortunately, I cannot help you with your question as I have never went down this deep in the rabbit hole fixing an espresso machine.

Having said that, I have faith in your abilities. I'm sure you will uncover the root of the problem. In doing this exercise you will be a whole lot knowledgeable on the hardware that your machine has.

 ;)
1-Cnter, 2-Bean, 3-Skin, 4-Parchmnt, 5-Pect, 6-Pu
lp, 7-Ski

Offline peter

  • The Warden - Now Retired
  • Retired Old Goats
  • **
  • Posts: 14518
  • Monkey Club Cupper
Re: Fiorenzata Bricoletta
« Reply #36 on: March 09, 2017, 10:42:32 AM »
Any thoughts on what to look for at this point?

A winning lottery ticket?

I have my pressure regulator set to 2 bar, so it pre-infuses at that level.  Like mp, I'm no expert, but don't think you need 30psi going into your pump.
Quote of the Day; \"...yet you refuse to come to Me that you

Offline Alaroast

  • Standard User
  • **
  • Posts: 134
Re: Fiorenzata Bricoletta
« Reply #37 on: March 09, 2017, 07:44:16 PM »
Any thoughts on what to look for at this point?

A winning lottery ticket?

I have my pressure regulator set to 2 bar, so it pre-infuses at that level.  Like mp, I'm no expert, but don't think you need 30psi going into your pump.

A little confused by this; 2 bar is equal to 29 PSI which is close to what I have my pressure regulator set at which is what goes into my pump. Could you clarify? I'm still new at this. ;)
« Last Edit: March 10, 2017, 07:43:58 AM by Alaroast »
Fiorenzato espresso, Ceado E6P v2 grinder, USRC 3kg roaster

Offline peter

  • The Warden - Now Retired
  • Retired Old Goats
  • **
  • Posts: 14518
  • Monkey Club Cupper
Re: Fiorenzata Bricoletta
« Reply #38 on: March 10, 2017, 07:46:59 AM »
My bad.  I overlooked the psi/bar thing.
Quote of the Day; \"...yet you refuse to come to Me that you

Offline Alaroast

  • Standard User
  • **
  • Posts: 134
Re: Fiorenzata Bricoletta
« Reply #39 on: April 12, 2017, 06:06:35 AM »
Just an update to closer this thing out or for those interested. Finally got my machine back from the shop. The fill valve/solenoid was leaking which is what I suspected. New one installed and all is well. Now on to enjoying some good espresso :)
Fiorenzato espresso, Ceado E6P v2 grinder, USRC 3kg roaster

Abqbomb

  • Guest
Re: Fiorenzata Bricoletta
« Reply #40 on: April 12, 2017, 12:12:14 PM »
I really think you need pictures and video to properly close out this thread  :)

Offline YasBean

  • Standard User
  • ****
  • Posts: 539
  • Lever that sucker!
Re: Fiorenzata Bricoletta
« Reply #41 on: April 12, 2017, 09:03:57 PM »
I really think you need pictures and video to properly close out this thread  :)
Agree!
Londinium L1, Bullet R1, Compak E8, VBM DB, Vario, Hario Vac

Offline Alaroast

  • Standard User
  • **
  • Posts: 134
Re: Fiorenzata Bricoletta
« Reply #42 on: April 13, 2017, 06:09:25 AM »
Roger that ;D Consider it done. I'll work that soon. Thanks for all the help and suggestions!
Fiorenzato espresso, Ceado E6P v2 grinder, USRC 3kg roaster

Offline Alaroast

  • Standard User
  • **
  • Posts: 134
Re: Fiorenzata Bricoletta
« Reply #43 on: April 13, 2017, 07:45:20 AM »
Not sure how to upload a video. Here is my current set up.
Fiorenzato espresso, Ceado E6P v2 grinder, USRC 3kg roaster