Green Coffee Buying Club
Coffee Discussion boards => Hardware & Equipment => Topic started by: Dante on July 30, 2008, 08:41:40 PM
-
My Hottop needs a top filter change and I can't find a source for it locally. I would appreciate a lead from Hottop owners if they could suggest a stop gap substitute while I look around for a site that sells the filter fast? Would a piece of hepa filter work if swapped with the one that ships with the Hottop?
Thanks!
-
I love my HotTop! ;D I have done about 30 roasts in it, and suspect I may need to change the filter, but am not sure. I have actually disassembled my filter and rinsed it down (fuzzy coffee oil hairs were growing on it), but I cannot tell if I need to replace it, yet.
To answer your question, though, I bet a quick call or e-mail to Michael at HotTop U.S.A. would get you a few filters in the mail today. He is really good about such things. I bought my roaster directly from him, and it was shipped right away.
-
I use Scotchbrite pads, Just trim to fit inside the filter frame. Cheap and works great.
Carl
-
Yasbean, I put in an order for a couple of these filters but it will take some time for this order to get to me. By the way, I completely took my Hottop apart after doing about 100 roasts in it. There was chaff all over the electronics compartment and yes, Yasbean, a lot of those "fuzzy coffee oil hairs" growiing out of almost everything there. Except I am not sure if those are oil hairs or fungus? Can oil make those moldy-looking fuzzy hairs? It was yuck time, but it took all of just 30 minutes for me to clean up all that gunk, and restore the innards of the Hottop to pristine condition. Now, I'm ready to do those Geshas!
CoffeeCarl, the Scotchbrite suggestion is fantastic. I will try that out asap! Many thanks!
-
I use Scotchbrite pads, Just trim to fit inside the filter frame. Cheap and works great.
Carl
Can you use this for the top filter also. Sounds like a great idea and would save some money. Have you noticed any difference in the roast or air flow when the fan is on?
Mike
-
I use Scotchbrite pads, Just trim to fit inside the filter frame. Cheap and works great.
Carl
Can you use this for the top filter also. Sounds like a great idea and would save some money. Have you noticed any difference in the roast or air flow when the fan is on?
Mike
Hi Mike, I was planning to use this for the top filter. I think that's what Carl was also referring to?
-
I use Scotchbrite pads, Just trim to fit inside the filter frame. Cheap and works great.
Carl
Can you use this for the top filter also. Sounds like a great idea and would save some money. Have you noticed any difference in the roast or air flow when the fan is on?
Mike
Hi Mike, I was planning to use this for the top filter. I think that's what Carl was also referring to?
Just wondering why it would or not work for the rear filter, especially since I roast outdoors.....
-
I have never used the Scotchbrite for the top filter, only the rear filter. I'm afraid the top filter may see
way to much heat. The top filter lasts a long time, I have only replaced mine once or twice. I believe I
got the replacements from Sweet Marias.
Good Luck
Carl
-
Thanks for the clarification Carl. I might have ended up with roasted scotchbrite in the top filter if I had tried using it to sub for the original. I have a couple of the top filters on order, but they won't get to me until a month or so. In the meantime, I plan to use a hepa filter cut to size but I need to test that for heat resistance first, I suppose. You're right about that part of the roaster getting plenty of heat.
-
I have never used the Scotchbrite for the top filter, only the rear filter. I'm afraid the top filter may see
way to much heat. The top filter lasts a long time, I have only replaced mine once or twice. I believe I
got the replacements from Sweet Marias.
Good Luck
Carl
Did you notice any difference in times or roast temps?? My guess would be that you could throw the whole thing in the dishwaher when it needed cleaning? I have one made up ready to use, just looking for your experiences.
-
It may slightly affect your roast times, but not by much. I control my fan manually, I don't really
notice any difference. Give it a shot.
Carl