Vendor Discussion Boards > Commercial Hardware discussion
Pressure Gauge
(1/1)
DRB:
Hello all! I've recently started roasting on a 1-K LP North Roaster. The stock pressure gauge (Chinese part) seems pretty cheap. I was wondering if anyone may have a recommendation for reputable brands for replacement.
Thank you!
hankua:
Dwyer has some nice ones, and is a name brand. One popular with the Huky crowd is: Dwyer® 2.5" Low Pressure Gage, LPG5-D8122N, Bottom Connection, 0-15" w.c. (0-3.75 kPa)
The gauge has a bladder inside that can rupture, not a good idea to expose it to high pressures. The only other reason I'd replace one is to have a wider usable scale range. 0-10 kPa gauge on a machine that's tops out at 3kPa for example.
Joe:
hi DRB welcome to the forums. I am assuming you mean the North roaster?
Ascholten:
DRB a welding supply store might have some gauges for you as well fairly cheap. You can also possibly try a barbecue store, for the propane regulators.
Aaron
DRB:
--- Quote from: Joe on July 28, 2016, 09:37:30 AM ---hi DRB welcome to the forums. I am assuming you mean the North roaster?
--- End quote ---
Of course. I understand they don't manufacture the machine. Yes, it's the 1k North roaster. I'll check out Dwyer and see what they have to offer.
I purchased the Marshall regulator kit with the roaster and it works just fine.
Thank you all for the info!
Navigation
[0] Message Index
Go to full version