Looks great. Is the software controlling ejection solenoid, and fan? And if so how are u connecting that to the tc4? I am consumed with anticipation
Yes, it will control the entire Hottop. I'm planning on using the Jeelabs connection for the display (with an adapter) and then use the LCD plug for the hottop controls (it's conveniently 8 pins of digital I/O, power and ground on the correct pins... except for 2 pins, those I'll re-route).
After I got rid of
our Sono, I got to thinking about a widget for it. Gas heat would be a bitch to control with your widget - unless you didn't try to control the heat output, but concentrated on the actual heat.
Let the burner run constantly and have a variable fan regulate the chamber temps. That way you could run a fixed BTU burner constantly; probably a lower rated burner would be needed if it's constantly on.
Like I said, I thought of this
after I sold the Sono.