Green Coffee Buying Club
Coffee Discussion boards => Hardware & Equipment => Topic started by: BoldJava on May 27, 2011, 09:56:50 AM
-
Take a look if you would and let me know if that branding/logo will come off or is it imprinted into the glass/plexiglass.
I am negotiating with the seller. Don't want it if that stuff doesn't come off. Also, might just be able to have a new sheet of plexiglass cut, drill it, and badda bing. Want to snag it for bulk grinding that I do. If that logo will come off, I will go out and check out the grind. New burrs are $153/set. Yikes.
B|Java
http://milwaukee.craigslist.org/bfs/2398310687.html (http://milwaukee.craigslist.org/bfs/2398310687.html)
-
That is a plexiglass front panel, 4 screws remove it. I have one of these I am rebuilding, that panel is strange, its got a 1/2 gap between it and the grinder, so most of the beans fill it up but never come out. I guessing when its sitting on a counter they want the customer to see lots of beans. I plan on replacing mine with a flat piece of plexglass. The insides of these look like a tank, I believe they will last forever. They do not use sharp burrs to grind, it seems to crush the coffee if you look at the burrs. I never fix mine yet so I hope they do a good job grinding. The book says you can grind thousands of pounds before replacing burrs.
-
If it's in good shape go for it worry about pimping it out later. Hard to tell but looks like something a heat gun and razor blade should remove then throw your goat sticker on it.