Kill A Watt for christmas.

[paultflorida]

Yay,  so I plugged it into the socket I use and the reading was 122.5 volts.. 
Even with the microwave and hood fan running, it only droppped to 120.

SO it looks like my voltage is where it should be, I havnt pluged in the behmnor yet to see what the draw would be, will do that next week when I roast again.
 

[peter]

The voltage was good that one time.  Check early and often.

[mp]

Yeah ... I hope the one I ordered comes soon.

 

[paultflorida]

Wll I did my 4 1lb roasts today.
Killa watt started out at 121 volts,, started the behmor and it dropped to 119,,
a few times it dropped as low as 117 but them balanced out to 118-119 for the roasts,,

Over the 4 roasts it reacted the same using a p3  and a p2 profile on the behmor, so it was consistant and as long as that holds true, I guess im in good shape.
Anything I should be concerned about?

[az erik]

^^ this, it was my experience as well with the kw/variac/bh


Sent from my iPhone5 using Tapatalk so pardon my spelling.