Green Coffee Buying Club
Coffee Discussion boards => Hardware & Equipment => Topic started by: willix on October 12, 2010, 07:29:01 AM
-
I've had the Nesco Pro Roaster for about 18 months now and I'm ready to buy one with more capacity. In looking at the Bravi Home Roaster (1/2 lb capacity) and the Behmor (1lb capacity), I'm looking for advise as to which one to buy, since they are the same price - (about $300). Here are my considerations:
1. I presently roast about 3 loads a week in the Nesco, so 1/2 vs 1 lb capacity is not a really big issue.
2. The Nesco is loud, so there is no listening for any "cracks". All must be done by sight. Would like to be able to listen to the roast.
3. The Nesco has no programmable roast curves; it's just off or on. Does variable temps during roast cycles offer that much of an advantage toward better tasting roasts, especially since I tend to go for the darker roasts?
4. Any other advantages/disadvantages to either of the two roasters?
Thanks in advance,
-
As far as I know the Bravi is no longer made, so you cannot get parts or service. It was the successor to the Swismar Alpenrost. Good roaster, but programming is limited.... but I guess that's true with the Behmor too, but it's still made and supported.
Hope that helps
-
Thanks, I wasn't aware of that. So I guess that means that the only $300 roaster available is the Behmor 1600, and the next one up in price from that is the Gene Caffe for $500.00?
-
The behmore has a larger capacity, is a drum roaster, and the gen is a fluidized bed roaster sort of if I am correct.??
The behmore I believe has more flexibility in what you can do with it and you do not have to roast a pound at a time, you can do 1/4 , 1/2 or a full pound on it.
I have one and have had no problems with it really.
Aaron
-
I just wish someone would manufacture the TurboCrazy. I can see something in the $350 - $500 range, with a 1 lb capacity, that would simply blow the doors off the competition.
But then again, who'd buy it when the things can be put together from new parts for ~$80? But I keep looking at what's available and see a good niche for a simple roaster.
???
-
Does variable temps during roast cycles offer that much of an advantage toward better tasting roasts...
Yes.