Green Coffee Buying Club

Coffee Discussion boards => Hardware & Equipment => Topic started by: grinderz on March 31, 2010, 09:55:55 PM

Title: Paging Mr. Tex! Bunn ES-1A parts
Post by: grinderz on March 31, 2010, 09:55:55 PM
There's an ES-1A on ebay starting out cheap, but it needs some parts, quote: "Missing parts – including pressurstat, flow meter, pump head."

If I buy this, what'r the chances I'll be able to find these?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=370357900000&ssPageName=ADME:B:SS:US:1123 (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=370357900000&ssPageName=ADME:B:SS:US:1123)

Title: Re: Paging Mr. Tex! Bunn ES-1A parts
Post by: Tex on April 01, 2010, 09:21:32 AM
Parts are readily available at http://www.cafeparts.com (http://www.cafeparts.com) & http://www.espressoparts.com (http://www.espressoparts.com). As long as the brain box is OK there's nothing in a Bunn that's not standard (cheap) espresso machine. I would ask the seller for more detailed pics of the inside - I see the cover for the 3-way valve exhaust is also missing and the portafilter is definitely not a stock Faema/Futurmat item.

When techies start stripping a machine for parts you've got to be very careful about buying what's left over.
Title: Re: Paging Mr. Tex! Bunn ES-1A parts
Post by: grinderz on April 01, 2010, 12:48:21 PM
Sounds like good advice. I'm going to proceed with caution.

Pressurestat ~$90
Flowmeter head ~ $90
Pump Head ~ $130 - $200

After pricing the parts, I'll have to think really hard about this.
Title: Re: Paging Mr. Tex! Bunn ES-1A parts
Post by: Tex on April 01, 2010, 01:11:06 PM
That's wise.

I asked the seller for pics of the internals and all they said was what you see is what you get. I've had dealings with these guys before and I'd have to rate them as uncooperative at best.
Title: Re: Paging Mr. Tex! Bunn ES-1A parts
Post by: grinderz on April 01, 2010, 01:41:03 PM
Much appreciated.  I'm going to ask them if the the brains still work and for pics with the cover off. If they aren't forthcoming, then I'm gonna pass.
Title: Re: Paging Mr. Tex! Bunn ES-1A parts
Post by: Tex on April 01, 2010, 02:04:36 PM
But still, IF you can source the parts used & in good condition this would be a helluva buy!  :-\
Title: Re: Paging Mr. Tex! Bunn ES-1A parts
Post by: Gime2much on April 01, 2010, 06:56:32 PM
This part:

83 lbs shipping weight + pallet

Available for pick up at our warehouse in suburban Philadelphia

We offer to box, shrink wrap and strap to a small pallet for $25 to ship via freight company (100+ lbs with pallet)


Made it a definite no go for me.

Dan Brewer
Title: Re: Paging Mr. Tex! Bunn ES-1A parts
Post by: Tex on April 01, 2010, 08:16:13 PM
This part:

83 lbs shipping weight + pallet

Available for pick up at our warehouse in suburban Philadelphia

We offer to box, shrink wrap and strap to a small pallet for $25 to ship via freight company (100+ lbs with pallet)


Made it a definite no go for me.

Dan Brewer

I tried to tell 'em it only will weigh ~75# when boxed for UPS. Like I said uncooperative.

Title: Re: Paging Mr. Tex! Bunn ES-1A parts
Post by: grinderz on April 05, 2010, 08:12:00 PM
It looks like I'm going to pass on this. I got some freight quotes online and the cheapest was over $200. Anybody live in Philly?

Title: Re: Paging Mr. Tex! Bunn ES-1A parts
Post by: Tex on April 05, 2010, 08:28:31 PM
It looks like I'm going to pass on this. I got some freight quotes online and the cheapest was over $200. Anybody live in Philly?


We regularly pack and ship these via UPS ground for ~$80. The machine is also missing the pop-off valve and ??