Let's try this thread.....
You know I've never tested mine before....
Cuisinart DCC-1200so I measure it today.
so based on a 12 cup pot
1st 2 cups 180 - 186
2nd 2 cups 186 - 193
3rd 2 cups 193 - 196
4th 2 cups 193 - 196
5th 2 cups 194 - 198
6th 2 cups 195 - 201
It seems it tries to keep it at about 200 degrees, but takes a while to warm things up.
Not bad... for $59 at costco a few years ago. And they do make a thermal pot version too.
I do have 2 more of these... I'll test them too. Bought at different times.
EDIT: Ok, I tested #2 and it had very similar results... peaking at 206 degrees.
so I decided to see if running a pot of water through the brewer first made and difference....
It did..
once the brewer is up to temp.... 190+ degree water... normally around 195. I'm guessing that's their design point, and since the water flows out in bursts... the temp of the water itself is probably 195.
If I get too bored the next few days I'll put the Milowidget on it and plot the temperature vs time.